Outdoor 12V 60W DC power supply
Standard benefits:
High-efficiency Protections: short circuit, overload, over-voltage, over temp Cooling by free air convection
NON-Dimmable power supply max watt 150w, which is perfect for powering large outdoor LED light.
Full range Small volume, low weight, high-efficiency Protections; water level IP67 waterproof
Product Details:
Plastic Waterproof Fanless Ultra Thin driver transformer power supply
20w-300w 12vdc 24vdc output, 100-240vac input,175-240vac input
LED Strip Lights power supply lighting driver transformer
LED Strip Lights constant voltage driver transformer
Product Feature
1. Aluminium shells waterproof ultra-thin series, mainly used in LED Strip Lights.
2. waterproof, outdoor use like your LED Strip Lights LED Modules.
3. Half of 100% pure glue, good for cooling, no fan design, and quiet.
4. High quality, 2 years factory warranty.
5. 100% full load burn-in test. Usable 0W ~ 75W.
6. Protections: short circuit, overload, over-voltage, over temp.
Product Wiring
Product Wiring
LED power supply module 12 Volt 5 Ampere = 60 Watt
Electronically clocked power supply in plastic housing for LED strips or LED lamps.
Only for installation in closed housings or luminaires.
Technical data
Connection 110 to 230 Volts
Color white, silver, black
Rated current 5 amps
Secondary 12 Volt DC
Housing plastic, indoor and outdoor
Further, links to: “LED power supply module 12 Volt 5 Ampere = 60 Watt”.
LED power supply module 24 Volt 2.5 Ampere = 60 Watt
Electronically clocked power supply in plastic housing for LED strips or LED lamps.
Only for installation in closed housings or luminaires.
Technical data
Connection 110 to 230 Volts
Color white, silver, black
Rated current 2.5 amps
Secondary 24 Volt DC
Housing plastic, indoor and outdoor
Further, links to: “LED power supply module 24 Volt 2.5 Ampere = 60 Watt”.
| MODEL | CLPS60-W1V12 | CLPS60-W1V24 | |||||||
| OUTPUT | RATED VOLTAGE | 12V | 24V | ||||||
| NO-LOAD VOLTAGE(MAX.) | 12.6V | 25.2V | |||||||
| VOLTAGE TOLERANCE | ±5% | ±5% | |||||||
| RATED CURRENT | 5A | 2.5A | |||||||
| CURRENT RANGE | 0-5A | 0-2.5A | |||||||
| RATED POWER | 60W | 60W | |||||||
| RIPPLE& NOISE (MAX.) | 120mVp-p | 150mVp-p | |||||||
| POWER FACTOR(Typ.) | 0.6 | 0.6 | |||||||
| INPUT | VOLTAGE RANGE | 100-240VAC | |||||||
| FREQUENCY RANGE | 50-60 Hz | ||||||||
| AC CURRENT(Typ.) | 1.02A/115V, 0.51A/230V | ||||||||
| EFFICIENCY(Typ.) | 88% | 89% | |||||||
| COLD START CURRENT | 30A/AC220V | ||||||||
| SETUP, RISE, HOLD UP TIME | 2000ms, 100ms, 30ms | ||||||||
| NO-LOAD CURRENT | <50mA/240VAC | ||||||||
| PROTECTION | OVER LOAD | hiccup 115%~135% of the rated power 60W, | |||||||
| recovers automatically after fault condition is removed | |||||||||
| OVER CURRENT | protected over the maximum rated current, | ||||||||
| recovers automatically after fault condition is removed | |||||||||
| SHORT CIRCUIT | hiccup short circuit, | ||||||||
| recovers automatically after fault condition is removed | |||||||||
| OVER TEMP | protected when the Rectifier ≥105 °C, | ||||||||
| recovers automatically after temperature fall to environment temp | |||||||||
| ENVIRONMENT | WORKING TEMP&HUMIDITY | –20 °C~+60°C (no frost), 20%~90%RH | |||||||
| STORAGE TEMP&HUMIDITY | –40°C~85°C, 10%~95%RH | ||||||||
| SEISMIC CAPACITY | 10-500Hz 2G 10.min/1 60min | ||||||||
| WITHSTAND VOLTAGE | I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min, | ||||||||
| INSULATION RESISTANCE | 100M ohm s/DC500V | ||||||||
| SAFETY&EMC | SAFETY STANDARDS | GB4943 ;IEC60950-1; EN60950-1 | |||||||
| EMC STANDARDS | EN55022 CLASS A;GB9254 | ||||||||
| REMARK | 1. The above mentioned data were measured at 220VAC input and 25°C. | ||||||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated | |||||||||
| with a 0.1uf & 47uf parallel capacitor. | |||||||||
