How to solder LED strips for the LED lighting project?
One way to connect LED strips is soldering.
Right at the beginning, you should prepare the necessary things:
-tapes or wires for soldering
Heat the soldering iron (the temperature should be between 320-380°C).
2 Attach the tin to the strip lights
3 Connect the dots horizontally with the applied tin.
Cool for a few seconds.
LED Power Supply Connecting longer LED strips
Do not connect sections longer than 5 m – such connection may cause voltage drops. Connecting LED strips to a power supply should be done according to the diagram:
LED Driver use for LED embedded lighting application
15W-60W DC 12V 24V Power Supply
The Xinreal NP or PC series power supplies are part of high-performance professional power supplies, with a perforated plastic structure, with air dissipation.
They are suitable for indoor use and ideal for use in the industrial field.
This LED power supply is equipped with overload protection, overvoltage, and a short circuit.
The power supply comes with a volt regulator (Adj) that allows you to have an output voltage (output) from 10.2V to 13.8V.
It is suitable for all LED strips and devices with constant DC 12V and DC 24V.
Outdoor LED Power supply used for LED products
Waterproof LED power supply 60W -300W
LED power supplies are the most critical part of the installation that supplies power to the LED lighting system. Thanks to the LED power supplies, the entire system is supplied with power reliably, safely, and without interference. The power supply provides the LED light sources with a constant current and the appropriate voltage.
AC input side 100-240V 175-240V
DC Output 12V 24V
Constant Current LED Drivers for LED architectural lighting installation
The common application uses high-power LEDs with constant current drivers, requiring a DC voltage input. Use for LED fixture cabinet lights, LED fixture lighting installation
Dimmable power supply
Indoor Dimmable power supplies
AC side 100-240V